Showing all 4 results

CBD For The People ***ALL NEW Uncut Wax Cartridges 1000mg (x3) 81% CBD!!! (Choose Flavors)

***NO BATTERY INCLUDED

The X3 is our flagship cartridge, with potency over 80% and
effectiveness like you wouldn’t believe. We’ve been trying to make this
puppy happen for the better part of a year, but we kept running into one
pesky little snag: Chemistry. (What a jerk, amirite?)

Turns out the CBD molecule is really big and likes to crystallize at
concentrations over 60%, and there isn’t a dang thing you can do about
it. Any attempts to make a cartridge stronger than our game-changing X2
ended up with wax that would turn into CBD rock candy, get stuck halfway
up the cartridge, refuse to flow down into the intake holes, and make us
really sad.

But fear not! For we found a way.

Enter…the Elite HEAT.

This bad boy is the grooviest 510-thread-compatible cartridge battery
you’ll ever see. It’s got all the main features of our super-rad FTP
Elite battery PLUS an awesome warming chamber that ensures even the
thickest, most crystallized cartridges can flow and provide a consistent
vaping experience.

Now you CAN use the X3 cartridge with a regular battery, but be warned –
the cartridge has to be kept upright at all times or the wax will get
stuck. You should probably be ready to bust out a hair dryer to melt the
wax down a bit just in case. If dealing with that noise isn’t your jam,
go up one paragraph and we’ve got you covered.

***ALWAYS FREE SHIPPING at CBD Wholesalers!

CBD For The People ***ALL NEW Uncut Wax Cartridges 1000mg w/ EliteHEAT™ Battery (x3) 81% CBD!!! (Choose Flavors)

*****BATTERY INCLUDED*****

The X3 is our flagship cartridge, with potency over 80% and
effectiveness like you wouldn’t believe. We’ve been trying to make this
puppy happen for the better part of a year, but we kept running into one
pesky little snag: Chemistry. (What a jerk, amirite?)

Turns out the CBD molecule is really big and likes to crystallize at
concentrations over 60%, and there isn’t a dang thing you can do about
it. Any attempts to make a cartridge stronger than our game-changing X2
ended up with wax that would turn into CBD rock candy, get stuck halfway
up the cartridge, refuse to flow down into the intake holes, and make us
really sad.

But fear not! For we found a way.

Enter…the Elite HEAT.

This bad boy is the grooviest 510-thread-compatible cartridge battery
you’ll ever see. It’s got all the main features of our super-rad FTP
Elite battery PLUS an awesome warming chamber that ensures even the
thickest, most crystallized cartridges can flow and provide a consistent
vaping experience.

Now you CAN use the X3 cartridge with a regular battery, but be warned –
the cartridge has to be kept upright at all times or the wax will get
stuck. You should probably be ready to bust out a hair dryer to melt the
wax down a bit just in case. If dealing with that noise isn’t your jam,
go up one paragraph and we’ve got you covered.

 

*X3 Cartridge & Battery Instructions*

Items needed:

* X3 cartridge (full or half gram)
* EliteHEAT battery
* Preheat chamber (separated from battery)
* You!
* One or more of your favorite people (optional)

Step 1: Turn on the battery, if it’s not on already. Click the button 5
times really fast (one-two-three-four-five, within 1 second).

Step 2: Ensure the battery is set to the correct voltage setting – we
recommend starting with white and going up from there. To cycle
voltages, triple-tap the button (one-two-three, within 1 second): White
à Blue à Green à Red à reset (White)

Step 3: Screw the cartridge onto the battery threads. Make sure the
airflow holes are open (this is muy importante).

Step 4: Slide the preheat chamber over the cartridge and screw it onto
the battery.

Step 5: If the wax is solid – looks like tiny rock candy crystals,
doesn’t flow at all – DO NOT PANIC; this is what you got the EliteHEAT for.
Double-tap the button to start a preheat cycle, which lasts for 90
seconds if you let it do its thing. You’ll see the color change on the
button as it goes – this is the voltage increasing every 30 seconds to
fully heat the cartridge. So cool, right?!
If the weather is cold, the A/C is bumping, or you’re in a walk-in
refrigerator (we don’t judge) you might actually want a second warming
cycle to fully liquefy the X3. This is some gnarly-thick wax, it’s just
the nature of the beast. Still beats sitting there with a hair dryer.

Step 6: It’s vaping time! Hold down the button while inhaling through
the cartridge tip. If this is your first X3, start with SMALL PUFFS.
Again…gnarly-thick wax. Treat it with respect.

Step 7 (optional): Once you’re done, turn off the battery by repeating
step 1.

***ALWAYS FREE SHIPPING at CBD Wholesalers!

CBD For The People ***ALL NEW Uncut Wax Cartridges 500mg (x3) 81% CBD!!! (Choose Flavors)

***NO BATTERY INCLUDED

The X3 is our flagship cartridge, with potency over 80% and
effectiveness like you wouldn’t believe. We’ve been trying to make this
puppy happen for the better part of a year, but we kept running into one
pesky little snag: Chemistry. (What a jerk, amirite?)

Turns out the CBD molecule is really big and likes to crystallize at
concentrations over 60%, and there isn’t a dang thing you can do about
it. Any attempts to make a cartridge stronger than our game-changing X2
ended up with wax that would turn into CBD rock candy, get stuck halfway
up the cartridge, refuse to flow down into the intake holes, and make us
really sad.

But fear not! For we found a way.

Enter…the Elite HEAT.

This bad boy is the grooviest 510-thread-compatible cartridge battery
you’ll ever see. It’s got all the main features of our super-rad FTP
Elite battery PLUS an awesome warming chamber that ensures even the
thickest, most crystallized cartridges can flow and provide a consistent
vaping experience.

Now you CAN use the X3 cartridge with a regular battery, but be warned –
the cartridge has to be kept upright at all times or the wax will get
stuck. You should probably be ready to bust out a hair dryer to melt the
wax down a bit just in case. If dealing with that noise isn’t your jam,
go up one paragraph and we’ve got you covered.

***ALWAYS FREE SHIPPING at CBD Wholesalers!

CBD For The People ***ALL NEW Uncut Wax Cartridges 500mg w/ EliteHEAT™ Battery (x3) 81% CBD!!! (Choose Flavors)

*****BATTERY INCLUDED*****

The X3 is our flagship cartridge, with potency over 80% and
effectiveness like you wouldn’t believe. We’ve been trying to make this
puppy happen for the better part of a year, but we kept running into one
pesky little snag: Chemistry. (What a jerk, amirite?)

Turns out the CBD molecule is really big and likes to crystallize at
concentrations over 60%, and there isn’t a dang thing you can do about
it. Any attempts to make a cartridge stronger than our game-changing X2
ended up with wax that would turn into CBD rock candy, get stuck halfway
up the cartridge, refuse to flow down into the intake holes, and make us
really sad.

But fear not! For we found a way.

Enter…the Elite HEAT.

This bad boy is the grooviest 510-thread-compatible cartridge battery
you’ll ever see. It’s got all the main features of our super-rad FTP
Elite battery PLUS an awesome warming chamber that ensures even the
thickest, most crystallized cartridges can flow and provide a consistent
vaping experience.

Now you CAN use the X3 cartridge with a regular battery, but be warned –
the cartridge has to be kept upright at all times or the wax will get
stuck. You should probably be ready to bust out a hair dryer to melt the
wax down a bit just in case. If dealing with that noise isn’t your jam,
go up one paragraph and we’ve got you covered.

 

*X3 Cartridge & Battery Instructions*

Items needed:

* X3 cartridge (full or half gram)
* EliteHEAT battery
* Preheat chamber (separated from battery)
* You!
* One or more of your favorite people (optional)

Step 1: Turn on the battery, if it’s not on already. Click the button 5
times really fast (one-two-three-four-five, within 1 second).

Step 2: Ensure the battery is set to the correct voltage setting – we
recommend starting with white and going up from there. To cycle
voltages, triple-tap the button (one-two-three, within 1 second): White
à Blue à Green à Red à reset (White)

Step 3: Screw the cartridge onto the battery threads. Make sure the
airflow holes are open (this is muy importante).

Step 4: Slide the preheat chamber over the cartridge and screw it onto
the battery.

Step 5: If the wax is solid – looks like tiny rock candy crystals,
doesn’t flow at all – DO NOT PANIC; this is what you got the EliteHEAT for.
Double-tap the button to start a preheat cycle, which lasts for 90
seconds if you let it do its thing. You’ll see the color change on the
button as it goes – this is the voltage increasing every 30 seconds to
fully heat the cartridge. So cool, right?!
If the weather is cold, the A/C is bumping, or you’re in a walk-in
refrigerator (we don’t judge) you might actually want a second warming
cycle to fully liquefy the X3. This is some gnarly-thick wax, it’s just
the nature of the beast. Still beats sitting there with a hair dryer.

Step 6: It’s vaping time! Hold down the button while inhaling through
the cartridge tip. If this is your first X3, start with SMALL PUFFS.
Again…gnarly-thick wax. Treat it with respect.

Step 7 (optional): Once you’re done, turn off the battery by repeating
step 1.

***ALWAYS FREE SHIPPING at CBD Wholesalers!